BY-6000Neutral silicone sealant
A neutral-cure, single-component silicone with strong waterproofing and weather resistance. Bonds to most building materials without primer and stays flexible as temperatures move.
At a glance
Key figures
300 ml, 24 pcs/ctnNet weight
Natural drying and curingCuring method
1.65 ± 0.05 g/cm³Density (20°C)
Technical data sheet
BY-6000 specifications
| Property | Value |
|---|---|
| Appearance | Uniform paste, no impurities or particles |
| Density (20°C) | 1.65 ± 0.05 g/cm³ |
| Curing method | Natural drying and curing |
| Liquidity | None |
| Environmental contaminability | None |
| Net weight | 300 ml, 24 pcs/ctn |
| Color | White / black / customize |
Values as published in the product datasheet and on the packaging. Typical values, not a specification. Always run a compatibility and adhesion test on the actual substrate before full application.
Features
What it does
Single componentEasy to use, no mixing required.
Neutral cureNon-acidic, preventing corrosion on building materials.
Excellent bondingWood, metal, glass, concrete and more — no primer needed.
High flexibilityExtensible after cure, adapting to temperature change without cracking.
WaterproofLong-term watertight sealing.
Non-shrinkingNo shrinkage after cure, so sealing performance holds.
Applications
Where it goes
- Waterproof sealing at baseboards, door and window frames, gypsum board and ceilings
- Edge sealing of wardrobes, cabinets and indoor furniture
- Repair of wall cracks, gaps and gypsum ceiling edge cracks
- General construction and home improvement sealing
Not sure this is the right grade?
Send us the substrate and joint width — we will name one.
Same range
Other grades in this range
Compare the figures before you decide.
HP-9900
Neutral structural silicone sealant
Curing method · Neutral cure, room temperature
Skinning time · 15–30 minutes (at 25°C)
Skinning time · 15–30 minutes (at 25°C)
HP-8800
Neutral curtain-wall silicone sealant
Curing method · Neutral cure, room temperature
Skinning time · 15–25 minutes (at 25°C)
Skinning time · 15–25 minutes (at 25°C)
HP-7000
Neutral silicone sealant for glass and stone
Curing method · Neutral cure, room temperature
Skinning time · 15–30 minutes (at 25°C)
Skinning time · 15–30 minutes (at 25°C)
HP-2000
Neutral weatherproofing silicone sealant
Curing method · Neutral cure, room temperature
Extrudability · Good extrudability within 4°C to 40°C
Extrudability · Good extrudability within 4°C to 40°C
Enquiries
Order BY-6000
Tell us the volume and destination port. You get a datasheet and a price, usually within 24 hours.
