HP-7000Neutral silicone sealant for glass and stone
A high-strength neutral silicone for bonding glass, stone, aluminium panels and insulation panels, including secondary sealing of insulating glass.
At a glance
Key figures
300 ml, 24 pcs/ctnNet weight
15–30 minutes (at 25°C)Skinning time
−50°C to +150°CService temperature
+5°C to +40°CApplication temperature
Technical data sheet
HP-7000 specifications
| Property | Value |
|---|---|
| Appearance | Smooth paste, available in various colors |
| Density (20°C) | 1.50 ± 0.05 g/cm³ |
| Curing method | Neutral cure, room temperature |
| Skinning time | 15–30 minutes (at 25°C) |
| Curing time | 48–72 hours (depending on thickness) |
| Application temperature | +5°C to +40°C |
| Service temperature | −50°C to +150°C |
| Tensile strength | ≥1.5 MPa |
| Elastic modulus | 0.4–0.8 MPa |
| Elongation at break | ≥150% |
| Shore A hardness | 30–40 |
| Water / UV / ozone resistance | Excellent |
| Color | White, black, customizable |
| Net weight | 300 ml, 24 pcs/ctn |
| Standard | GB/T 14683-2017 |
| Shelf life | 12 months |
Values as published in the product datasheet and on the packaging. Typical values, not a specification. Always run a compatibility and adhesion test on the actual substrate before full application.
Features
What it does
Single componentReady to use, no mixing required.
Neutral cureRoom-temperature cure suited to a wide range of materials.
High strength and adhesionMedium to high modulus for structural applications.
Excellent flexibilityRetains elongation and water-tightness after cure.
Durable elastomerNon-corrosive; resists cold, heat and environmental exposure.
Non-pollutingEnvironmentally considerate formulation.
Applications
Where it goes
- Bonding glass, stone, aluminium panels, plastic-steel and insulation panels
- Curtain walls, skylights and secondary sealing of insulating glass
- High-end sealing for high-rise buildings
- Industrial sealing where strength and durability are required
Not sure this is the right grade?
Send us the substrate and joint width — we will name one.
Same range
Other grades in this range
Compare the figures before you decide.
HP-9900
Neutral structural silicone sealant
Curing method · Neutral cure, room temperature
Skinning time · 15–30 minutes (at 25°C)
Skinning time · 15–30 minutes (at 25°C)
HP-8800
Neutral curtain-wall silicone sealant
Curing method · Neutral cure, room temperature
Skinning time · 15–25 minutes (at 25°C)
Skinning time · 15–25 minutes (at 25°C)
HP-2000
Neutral weatherproofing silicone sealant
Curing method · Neutral cure, room temperature
Extrudability · Good extrudability within 4°C to 40°C
Extrudability · Good extrudability within 4°C to 40°C
BY-6000
Neutral silicone sealant
Curing method · Natural drying and curing
Net weight · 300 ml, 24 pcs/ctn
Net weight · 300 ml, 24 pcs/ctn
Enquiries
Order HP-7000
Tell us the volume and destination port. You get a datasheet and a price, usually within 24 hours.
