M1Nail-free construction adhesive
An inorganic-base nail-free adhesive with a 40–50 kg maximum load capacity and a 15–20 minute working time — fixing without drilling.
At a glance
Key figures
15–20 minutesWorking time
−10°C to +60°CWorking temperature
40–50 kg (max)Load capacity
24 monthsShelf life
Technical data sheet
M1 specifications
| Property | Value |
|---|---|
| Color | White / Clear |
| Main agent composition | Inorganic adhesive material |
| Shelf life | 24 months |
| Working time | 15–20 minutes |
| Performance | Waterproof, weatherproof, anti-aging |
| Working temperature | −10°C to +60°C |
| Load capacity | 40–50 kg (max) |
| Specification | 300 ml, 24 pcs/carton |
Values as published in the product datasheet and on the packaging. Typical values, not a specification. Always run a compatibility and adhesion test on the actual substrate before full application.
Features
What it does
Strong bearing capacityUp to 40–50 kg maximum load.
Eco-friendly and non-pollutingSafe for indoor and outdoor use.
Non-yellowingColour-stable over time — good for visible joints.
Fast bonding with toughnessQuick initial grab while staying flexible.
Easy to use and cost effectiveSimple application, cleans up with water.
Temperature resistanceWorks reliably from −10°C to +60°C.
Applications
Where it goes
- General construction and repair in residential, commercial and industrial projects
- Door and window frames, panels and trims
- Furniture, mouldings, skirting boards and visible surfaces
- Areas exposed to moisture or temperature extremes
Not sure this is the right grade?
Send us the substrate and joint width — we will name one.
Same range
Other grades in this range
Compare the figures before you decide.
Enquiries
Order M1
Tell us the volume and destination port. You get a datasheet and a price, usually within 24 hours.
